Using IP Scanner
10
10 Using IP Scanner
✎
Note
In order for a computer to be used as a recipient, the TCP/IP setting must first be specified.
10.1IP Scanner
First, install IP Scanner onto the computer. Refer to “Installing the Utilities” on page
The transmitted image is received by the Image Receiver, and saved by IP Scanner as an image file in the “My Images” folder.
If the “Save folder as a key” check box in the main window was selected, a new folder with the same name as the scanner button is created and the image file is saved in that folder.
*This setting is available only if the document is scanned with a scanner function. For details on saving the data when the received fax document is transferred to IP Scanner, refer to “Sort Settings dialog box” on page
When using IP Scanner, be sure that Image Receiver is running.
While Image Receiver is running, its icon (
) appears in the Windows taskbar. Normally, Image Receiver starts up automatically when Windows starts up. If Image Receiver has not started up, start it up as described below.
“Start” → “Programs” → “IP Scanner” → “Image Receiver”
When Image Receiver begins to receive image data, the icon in the Windows taskbar flashes.
✎
Note
With IP Scanner, JBIG-encoded TIFF files cannot be viewed.
Scanner Mode |
