Minolta Scanner Mode user manual Specifying Transmission Settings

Specifying Management Settings

13

13.9Specifying Transmission Settings

The procedure for specifying transmission settings, which are set by the administrator, is described below.

13.9.1 Transmission Settings

Priority Quality:	Specify the default resolution setting that is
	selected when an operation is finished.
	During the production of this unit, the “Standard”
	setting was selected.
Priority Contrast:	Specify the default contrast setting that is
	selected when an operation is finished.
	During the production of this unit, the “Normal”
	setting was selected.
Com. Mode:	Specify the default communication mode that is
	selected when an operation is finished.
	During the production of this unit, the “G3-1”
	setting was selected.
Default	Specify whether the transmission mode returns
Transmission Mode:	to memory transmission or immediate
	transmission when an operation is finished.
	During the production of this unit, the “Memory
	TX” setting was selected.
	This parameter is available only when sending
	faxes on a common telephone line.
Attach TSI:	Specify whether the default transmission source
	name is selected when an operation is finished if
	multiple transmission source names are
	registered. During the production of this unit, the
	setting for the transmission source name
	registered at “1” was selected.
Rotation TX:	Specify whether or not rotation transmission is
	selected when an operation is finished.
	During the production of this unit, the “ON”
	setting was selected.
2-Sided TX:	Specify whether or not double-sided
	transmission is selected when an operation is
	finished, and specify the default binding margin
	settings for double-sided transmissions.
	During the production of this unit, the “No” setting
	was selected.

Scanner Mode 13-21