Specifying Management Settings

13.12 Specifying Report Output Settings

13

The procedure for specifying report settings, which are set by the administrator, is described below.

Report settings

TX Report:

Select how to output the report showing the

 

 

transmission result.

 

 

The factory setting is “Single destination : If TX

 

 

Fail, Multiple destination : If TX Fail”.

Activity Report:

Specify whether or not to automatically output

 

 

the activity report with every 50 communications.

 

 

The factory setting is “ON”.

Specifying the setting for the “TX Report” parameter

1Touch [Admin. 1], and then touch [Report Settings].

Refer to “Displaying the Administrator Management screen” on page 13-11.

2Touch [TX Report].

Scanner Mode

13-41

Page 260
Image 260
Minolta Scanner Mode user manual Specifying Report Output Settings, Report settings