2

Overview

2.7Scan to PC (SMTP)

Scan data can be sent as TIFF or PDF files to client computers using SMTP.

From the client computer, the enclosed IP Scanner application must be used to first specify the folder where data is saved. In addition, the IP Scanner application can be set to save the data in a folder that was created using the name of the one-touch key.

In order to receive the data at a client computer and save it as an image file, the enclosed utilities IP Scanner and Image Receiver are required.

If there is a DHCP server on the network, this function may not operate correctly since IP addresses are automatically distributed to each computer. In this case, specify a fixed IP address for the computer or use IP Scanner.

Client computer

Intranet

1Program a one-touch key with the IP address of the computer receiving the data.

2Using the same procedure for sending e-mail messages, specify that the data is to be sent to a computer.

3The sent scan data is received by the recipient computer.

4The IP Scanner application converts the data to a TIFF or PDF file, then saves the file in the specified folder.

2-8

Scanner Mode

Page 27
Image 27
Minolta Scanner Mode user manual Scan to PC Smtp