Minolta Scanner Mode user manual Programming the Transmission Source Name

Specifying Management Settings 13

13.7Programming the Transmission Source Name

The procedure for specifying the name of the user (transmission source name) is described below.

The transmission source name is used to notify the recipient of the name of this transmission source.

Precautions

A maximum of eight transmission source names can be registered. Since multiple transmission source names can be registered, a different transmission source name can be used for different recipients or for different accounts. Refer to “FAX Menu Screen” on page 8-19.

The transmission source name can contain a maximum of 40 characters.

The transmission source name is printed at the top of sent documents.

The registered transmission source name can be changed by following the same procedure used to register it.

Registering the transmission source name

1Touch [Admin. 1], and then touch [Initial Settings].

❍Refer to “Displaying the Administrator Management screen” on page 13-11.

2Touch [TSI Registration].

3Select the number where you wish to register the transmission source name.

Scanner Mode 13-17