
Preparation
3 Preparation
3.1LAN Connection
3
This copier can transmit with the TCP/IP protocol on a LAN. Therefore, the LAN cable must be connected.
Connect to the LAN by using a LAN cable (cable for Fast Ethernet
Connecting the LAN cable
Insert one plug on the LAN cable into the connector (marked LAN) at the back of the machine, and then insert the other plug into the hub.
Tip
The connector is at the back of the machine.
The LAN cable should be a cable for Fast Ethernet
The LAN cable is not included as an accessory.
Connector for LAN cable
LAN USB
USB printer connector (optional)
LED indicator• For more details, refer to the manual for the Pi3505e printer controller.
Power cord connector
Scanner Mode |