
Troubleshooting
15
Error |
|
| Page | |
Cause | Remedy | referen | ||
Code | ||||
|
| ce | ||
|
|
| ||
EF2508 | An error other than those listed | Check that the SMTP server can | - | |
| above occurred with the SMTP | transmit. |
| |
| server. |
|
| |
|
|
|
| |
EF2509 | The memory has become full. | Change the resolution to “Fine” | p. | |
|
| or “Standard”. |
| |
|
|
|
| |
Internet fax transmissions/Scan to |
| |||
|
|
|
| |
Error | Cause | Remedy | Page | |
referen | ||||
Code | ||||
|
| ce | ||
|
|
| ||
E4DXXX | Since the SMTP server address | Specify the SMTP server | p. | |
| is not specified, a connection to | address. |
| |
| the mail server cannot be |
|
| |
| established. |
|
| |
|
|
|
| |
E5AXXX | Since the DNS setting is | Check the DNS settings. | p. | |
| incorrect, transmission is not |
|
| |
| possible. |
|
| |
|
|
|
| |
E5DXXX | Since the | Check the settings and the | p. | |
| mail address of the recipient is | address of the recipient. | p. | |
| not specified correctly, |
|
| |
| transmission is not possible. |
|
| |
|
|
|
| |
E6FXXX | An attempt was made to send | Even though scanning may have | p. | |
| data that is too large to be sent. | finished, it may not be possible to |
| |
|
| send some documents. |
| |
|
| Change the resolution to “Fine” |
| |
|
| or “Standard”. |
| |
|
|
|
| |
EAXXXX | The LAN cable is not connected | Check that the LAN cable is | p. | |
| or the transmission to the SMTP | correctly connected, that | p. | |
| server failed. Otherwise, an | transmission is possible to the | p. | |
| attempt was made to send the | SMTP server, that the network |
| |
| data to the wrong recipient | settings, such as the subnet |
| |
| address. | mask, are correct, and that the |
| |
|
| recipient's |
| |
|
| correct. |
| |
|
|
|
| |
EABXXX | Verification of POP3 before | Check the POP3 account and | p. | |
| SMTP failed. | password. |
| |
|
|
|
|
Scanner Mode |