Minolta Scanner Mode user manual Refer to Network Settings on

Performing an Internet Fax/IP Address FAX Operation

8

[TX Marker]:	A stamp can be applied to the document to
	indicate that it was scanned.
	In order to use TX Marker, the optional TX
	Marker is required. When you set TX Marker, use
	an automatic document feeder.
	If the stamp is weak, replace it. Refer to “The
	stamp is weak.” in “Troubleshooting” of the Basic
	Operations volume of this User Manual.
[Subject]:	Previously registered text can be inserted as a
	subject when e-mail messages are sent.
	A maximum of 4 subject texts can be registered.
	Refer to “Network Settings” on page 3-3.
[Reply]:	When sending an e-mail message, the e-mail
	address registered at a one-touch key can be set
	as the recipient (Reply-to address) where reply
	e-mail messages sent by the recipient will be
	sent.
[File Name]:	The file name of image data attached to an e-
	mail that is being sent or scanned image data
	can be changed to this file name.
	The file name can contain a maximum of 16
	characters.

Scanner Mode 8-21