Minolta Scanner Mode Performing a Scan to PC Smtp Operation, Refer to Installing the Utilities on

Performing a Scan to PC (SMTP) Operation

9

9Performing a Scan to PC (SMTP) Operation

If there is a DHCP server on the network, this function may not perform correctly since IP addresses are automatically distributed to each computer.

In this case, set a fixed IP address with the DHCP server or use IP Scanner (refer to page 10-1).

First, install IP Scanner onto the computer, and then start it up. → Refer to page 10-21.

Refer to “Installing the Utilities” on page 3-29.

The transmitted image is received with Image Receiver, then saved by IP Scanner as an image file.

When using IP Scanner, check that Image Receiver is running. Refer to “IP Scanner” on page 10-1.

The operations performed from the copier are described below. For details on viewing the image file from the computer, refer to “Viewing the scanned image (from the computer)” on page 10-25.

9.1Basic Transmission

1 Position the document(s) to be scanned.

2Press the [Fax/Scan] key.

❍ For a copier, press the [Scan] key.

Scanner Mode 9-1