Minolta Scanner Mode user manual Specifying the setting for the Activity Report parameter

13

Specifying Management Settings

3Select how to output the report, and then touch [Enter].

❍Select how to output the transmission result report when there is only one recipient and when there are two or more recipients.

ON: Select this setting to automatically output a

transmission result report with every transmission.

If TX Fail: Select this setting to output the transmission result report only if the transmission failed.

OFF: Select this setting to stop the transmission result report from automatically being outputted.

4Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the standby screen (initial screen).

Specifying the setting for the “Activity Report” parameter

1Touch [Admin. 1], and then touch [Report Settings].

❍Refer to “Displaying the Administrator Management screen” on page 13-11.

2Touch [Activity Report].

3Touch whether (“ON”) or not (“OFF”) to automatically output the activity report, and then touch [Enter].

4Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the standby screen (initial screen).

13-42 Scanner Mode