Minolta Scanner Mode user manual DNS Settings screen

Preparation

3

Parameter	Description
Network Board Set	Specify the network board transmission speed
	(Auto/100 Mbps/10 Mbps) and duplex mode
	(Half Duplex/Full Duplex).
	*The “Network Board Speed” parameter is
	normally set to “Auto”. This automatically selects
	the transmission speed through auto
	negociation.
	The “Duplex” parameter is only available if the
	“Network Board Speed” parameter is set to
	“100M” or “10M”.

1In the Network Settings screen, touch [Basic Settings].

2Specify the necessary settings for the parameters in the page that appeared.

3Touch [Enter].

DNS Settings screen

The following parameters can be set from the DNS Settings screen.

Parameter	Description
DNS Setting	Specify whether or not the DNS (Domain Name
	System) function is used.
Host Name	Type in the host name for the DNS server.
	*Type in the server address only if the “DNS
	Setting” parameter is set to “Yes”.

Scanner Mode 3-9