Minolta Scanner Mode user manual

13

Specifying Management Settings

13.13.3Specifying Settings Concerning Whether or Not There Is a Connected Telephone or a Received Date Report and Their Formats (Mode 016)

You can specify whether or not there is a connected telephone or a received date report in the E-mail and fax modes, and you can specify their formats.

Setting during production

Bit	7	6	5	4	3	2	1	0
Setting	0	1	0	0	0	0	0	0	(HEX:40)

Specifying the setting

During the production of this unit, the settings in the shaded cells were selected. The numbers on the right side are page number with descriptions for the corresponding function.

				Page
Bit	Function	Setting	Description	referen
				ce
7	-	0	*Do not change these bits.	-
6	Specifies whether or not a	0	Not used	-
	connected telephone is
		1	Used
	used.
5	Specifies whether or not a	0	Not attached	-
	received date report is	1	Attached
	attached in E-mail mode.
4	Specifies whether the	0	Attached within the image	-
	received date report is	1	Attached outside of the
	attached outside or inside
	of the image in E-mail		image
	mode.
3, 2	-	00	*Do not change these bits.	-
1	Specifies whether or not a	0	Not attached	-
	received date report is	1	Attached
	attached in Fax mode.
0	Specifies whether the	0	Attached within the image	-
	received date report is	1	Attached outside of the
	attached outside or inside
	of the image in fax mode.		image

13-48 Scanner Mode