Minolta Scanner Mode user manual Network FAX Utility, Operation

Network Fax Transmission

12

12 Network Fax Transmission

Note

The “Gate Way TX” parameter on the Network Settings screen must be set to “Yes”. → Refer to “Scanner Settings screen” on page 3-16.

Network FAX must first be installed onto the computer.

For details on installing Network FAX, refer to the Network FAX User’s Manual.

12.1Network FAX Utility

For details on the initial setup and operation of Network FAX, refer to the Network FAX User’s Manual.

For [Setup]-[Fax Setup] dialogue of Network Fax, set the following items in the same way as items for the network configuration of this device.

Parameters from [Setup]-[Fax	Copier Network Settings Screen
Setup] in Network FAX	Parameters
Fax Domain	Self-domain Name
Fax IP Address	IP Address

The recipients are specifies as telephone (fax) numbers or e-mail addresses.

If both fax numbers and e-mail addresses are specified as recipients, broadcast transmission is possible.

Specify an e-mail address to send an e-mail with TIFF image data attached.

12.2Operation

There are no operations that can be performed from the copier. Perform direct fax transmissions from Network FAX installed on the computer.

For details on operating Network FAX, refer to the Network FAX User’s Manual.

Scanner Mode 12-1