
Performing a Scan to
4
7To change the file format or coding method, touch [Scan Mode], and then specify the desired settings.
8Specify the image quality, density and zoom ratio according to the document to be scanned.
❍Refer to “Specifying the Scanning Options” on page 4-18.
9Press the [Start] key.
The transmission begins.
If the document is placed on the original glass:
When scanning multiple document pages, continue scanning by placing each consecutive page on the original glass, then pressing the [Start] key.
After all pages of the document to be sent are scanned, touch [Scan End], and then press the [Start] key. The transmission begins.
If the transmission could not be completed
The unit will automatically try again (auto redial) up to five more times at
The number of auto redials and the interval can be specified. For details, refer to “Specifying Transmission Settings” on page
If the transmission could not be completed after auto redialing, a transmission report is outputted.
Part of the first page of sent document is copied onto this report. If it is not necessary to output the transmission report, change the settings.
Scanner Mode |