13

Specifying Management Settings

5After performing the operation or specifying the setting for the function, continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the standby screen (initial screen).

13.5Specifying the Date and Time

Before using the copier, be sure to specify the date and time.

This is required in order to send e-mail messages at a specified time or to record the correct time in reports.

Setting the date and time

1Touch [Admin. 1], and then touch [Initial Settings].

Refer to “Displaying the Administrator Management screen” on page 13-11.

2Touch [Date/Time Set].

3Touch [TimeDate].

13-12

Scanner Mode

Page 231
Image 231
Minolta Scanner Mode user manual Specifying the Date and Time, Refer to Displaying the Administrator Management screen on