Minolta Scanner Mode user manual Refer to Specifying Transmission Settings on

8

	Performing an Internet Fax/IP Address FAX Operation
[TX Report]:	The transmission results can be printed out as a
	report.
	This function can be set to one of the following:
	“Default”, “Output On” and “Output Off” or “If TX
	Fail”.
	The TX Report setting is reset after each
	transmission. Refer to “Specifying Report Output
	Settings” on page 13-41
[2in1]:	Scans of two document pages can be sent as a
	single page. This can be used, for example, to
	combine two legal-size document pages and
	send them as one legal-size page.
[2-Sided TX]:	Double-sided document pages can be scanned
	and sent.
	The 2-Sided TX setting is reset after each
	transmission. Refer to “Specifying Transmission
	Settings” on page 13-21.
[Rotation TX]:	You normally feed your document to the reader
	as “portrait”, so when you set the letter-size
	document as “landscape”, the reader handles it
	as ledger-size document, and it gets reduced at
	reception when the recipient facsimile paper is
	letter size.
	If you setup Rotation TX, you can send letter-size
	documents as a letter-size document whether its
	direction is landscape or portrait. Rotation TX is
	valid only when you send letter-size documents
	with under 200 dpi image quality setting, by the
	normal facsimile or Internet Fax (E-mail)
	transmission. The Rotation TX setting is
	canceled after each transmission.
	Refer to “Specifying Transmission Settings” on
	page 13-21.
[Priority TX]:	If documents are queued for transmission, a
	document specified as urgent can be given
	priority and sent.
[Timer]:	A document can be scanned and stored in the
	memory to be sent at a specified time. This
	function is convenient for sending documents at
	discounted calling times.

8-20 Scanner Mode