Minolta Scanner Mode Transmission Results Error Codes, Scan to Server FTP transmissions

Troubleshooting

15

15.2Transmission Results Error Codes

The following error codes appear in transmission activity report, reception activity report and the Job List screen.

Precautions

If a malfunction occurs during the operation of a network application function, an error code appears in the Job List screen or report. Refer to “Checking Transmission Results” on page 8-40. In addition, refer to “Reports and lists” on page 14-1.

Scan to Server (FTP) transmissions

Error	Cause	Remedy	Page
			referen
Code
			ce
ED2502	The LAN cable is not connected	Check that the LAN cable is	p. 3-1,
	correctly or the transmission to	correctly connected, and check	p. 3-18,
	the FTP server failed. Otherwise,	that the FTP server address and	p. 3-22
	an attempt was made to send the	port number and the proxy server
	data to the wrong recipient.	address and port number
		settings are correctly specified.
ED2503	Login could not be completed	Check the user name and	p. 3-18
	because the user name or the	password settings.
	password is incorrect.
ED2504	The specified folder is incorrect.	Check the folder name setting.	p. 3-18
ED2505	The FTP server disk is full.	Ensure that there is enough disk	-
		space.
ED2506	AN error occurred while	Check that the LAN cable is	p. 3-1
	forwarding data to the FTP	correctly connected, and that
	server.	transmission to the FTP server is
		possible.
ED2508	An error other than those listed	Check that the FTP server can	-
	above occurred with the FTP	transmit.
	server.
EF2509	The memory has become full.	Change the resolution to “Fine”	p. 5-8
		or “Standard”.

Scanner Mode 15-3