Minolta Scanner Mode Setting during production, Bit Function Setting Description Referen

Specifying Management Settings

13

13.13.2Specifying Settings Concerning the Confirmation Screen For Broadcast Transmissions (Mode 014)

You can specify whether or not a screen asking for confirmation of the settings is displayed before a broadcast transmission.

Setting during production

Bit	7	6	5	4	3	2	1	0
Setting	0	0	0	0	0	0	0	0	(HEX:01)

Specifying the setting

During the production of this unit, the settings in the shaded cells were selected. The numbers on the right side are page number with descriptions for the corresponding function.

				Page
Bit	Function	Setting	Description	referen
				ce
7, 6, 5,	-	000000	*Do not change these bits.	-
4, 3, 2
1, 0	Specifies whether or not a	00	The setting confirmation	p. 8-32
	screen asking for		screen is not displayed.
	confirmation of the settings
		01	The setting confirmation
	is displayed before a
			screen is displayed before
	broadcast transmission.
			a broadcast transmission.
		10	The setting confirmation
			screen is normally
			displayed, regardless of
			whether a broadcast
			transmission is being
			performed.
		11	*Do not change this
			setting.

Scanner Mode 13-47