Minolta Scanner Mode user manual Using PageScope Light, Accessing PageScope Light

Preparation

3

3.2.3Using PageScope Light

PageScope Light is a utility for managing devices supported by the HTTP server integrated into the printer/scanner controller. Using a Web browser, PageScope Light can remotely control the printer/scanner controllers on the network.

Indexes and one-touch keys can be registered and network settings can be specified from PageScope Light.

Accessing PageScope Light

Note

In order to use PageScope Light, the IP address must be set in advance. For details on setting the IP address, refer to page 3-8.

PageScope Light can be accessed through a Web browser.

1Start up the Web browser.

2In the Address bar, type the IP address of this copier in the format shown below, and then press the computer keyboard’s [Enter] key. http://controller_IP_address/

(Example) If the copier’s IP address is 192.168.0.10: http://192.168.0.10/

3The initial page of PageScope Light appears.

Operation

PageScope Light is used in the same way that Internet Web pages are viewed. Click Web page links to display those pages, or click the [Back] (or [Forward]) button to display the previous (or next) page.

Logging in Administrator mode

By logging into PageScope Light in Administrator mode, printer/scanner controller settings can be specified or checked.

1In the Admin Password box in the upper-left corner of the page, type the administrator password.

Scanner Mode 3-25