Minolta Scanner Mode user manual IP address faxing, Internet fax receptions

15

Troubleshooting

IP address faxing

			Page
Problem	Cause	Remedy	referen
			ce
Transmission	The connections are incorrect.	Check the LED indicator on	-
is not possible.		the hub and check the
		connections.
	Since the image data is too	• Increase the timeout setting	-
	large, a timeout occurred at	on the receiving end.
	the receiving end.	• Decrease the size of the
		image data, and then try
		sending it again.
	The settings necessary for the	Specify the necessary	p. 3-3
	device are not registered.	network settings.
	The LAN cable is damaged.	Replace the LAN cable.	-
	Other causes	Touch [Com.] on the Job List	p. 8-40,
		screen to check the details of	p. 15-3
		the transmission error, and
		then refer to the table of error
		codes.
Internet fax receptions

Problem	Cause	Remedy	Page
			referen
			ce
Reception is	The connections are incorrect.	Check the LED indicator on	-
not possible.		the hub and check the
		connections.
	The setting to not	Specify a time interval for	p. 3-1
	automatically check for new e-	automatically checking for
	mail messages has been	new e-mail messages.
	specified.
	The settings necessary for the	Specify the necessary	p. 3-1
	device are not registered.	network settings.
	The same POP3 user name is	Do not use the same POP3	-
	being used by a different e-	user name that is used by a
	mail application or another	different e-mail application.
	user.
	The LAN cable is damaged.	Replace the LAN cable.	-

15-10 Scanner Mode