
7
Performing a Scan to HDD Operation
After all pages of the document to be sent are scanned, touch [Scan End], and then press the [Start] key. The transmission begins.
✎
Tip
If the “URL Report” parameter was set to “ON”, a notification of the URL where the image data is saved will be sent by
7.2 Registering a Recipient
✎
Note
A mail box must have been created in advance using PageScope Light.
A maximum of 115 mail boxes can be created.
Creating a mail box (PageScope Light)
The following parameters can be set from the Create Mail Box page of PageScope Light.
Mail Box Name: | Type in the name of the mail box. |
| (12 characters or less) |
Password: | Type in the password. |
| (64 characters or less) |
Retype Password: | Type in the password again. |
Scanner Mode |