
Overview
2.8IP Scanner
2
Scan data is sent to a client computer, where it is saved in a folder that is created using the name of the scanner button.
After programming a button (Scan data destination and scan settings) from the client computer when scanning, a paper document can easily be saved as an electronic file with just the touch of a button in the copier’s touch panel.
In order to receive the data at a client computer and save it as an image file, the enclosed utilities IP Scanner and Image Receiver are required.
This function can be used in a network without a LAN if a crossover cable is used to connect the copier to a client computer. (Network settings are required.)
Client computer
1From the computer, program a button (recipient of the scan data).
2Touch the programmed button to send the scan image.
3The sent scan image is received by the recipient computer.
4The IP Scanner application converts the data to a TIFF or PDF file, then saves the file in the specified folder.
Scanner Mode |