Samsung SNC-C7478 user manual Installation Using Pole Mount Bracket, RS-485 Termination Resistor

installation

❖RS-485 Termination Resistor

ON ON

1 2 3 4 5 6 7 8

•Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it must be OFF state. Especially when you have trouble with long Daisy chain style connection, turn ON this termination switch of last camera.

– Pin 8 : RS-485 Termination Resistor (ON/OFF)

INSTALLATION USING POLE MOUNT BRACKET

1.Using the paper template, mark the holes on the wall.

2.After drilling the holes, fi x the four anchor bolts into the holes.

3.After locating the wall mount bracket on the anchor bolts properly. Tighten the nuts for anchor bolts



  

4.Connect cables to terminal blocks and BNC in the Network box. See the cabling in the next section.

12 – 36x Network Smart Dome Camera