setup tool
event is generated during the alarm output, the delay time is recalculated on the basis of the most recently generated an alarm.
<Alarm Image Transfer>: If <On> is selected, a JPG image is transmitted through FTP or Email(SMTP) or saved on the Micro SDHC memory card according to the <EVENT> ➝ <TRANSFER SETUP> settings.
<Camera Action>: Counteraction of camera when Alarm Input event occurs can be selected from <None>, <Preset 1 ~ 128>, <Pattern 1 ~ 4>, <AutoPan 1 ~ 8>, <Scan 1 ~ 8>, <Home Position>.
MOTION
❖M.D. Function
• Enable/Disable
M Even though Motion Detection is set to be enabled, this function is not working during PTZ, focus or Iris operations.
For reliable performance, it takes about 1 or 2 seconds for Motion Detection to return to work after PTZ, Focus, Iris operation.
Even if camera is subjected to external shocks or winds, those can be considered as motion detection.
❖M.D. Configuration
•Set the motion detection area and the sensitivity.
❖Motion Sensitivity
•Select a motion detection function sensitivity from <High>, <Medium> and <Low>. The <High> option provides high sensitivity of motion detection and generates motion detection event if a small motion is detected.
❖Motion Area
•You can set an area to detect motion.
❖Activation Time
•You can set time to accept a motion detection to take an action.
<Always>: Always conducts the <Action> setting when a motion is detected.
<Only Scheduled Time>: Conducts the <Action> setting for a motion detection only when it occurs during the specifi ed time period on the specifi ed day of the week. The Start Time must prior to and must differ from the End Time.
❖Action
•You can set an operation to be conducted when a motion is detected.
<Alarm Output>: Determines a motion detection output port to which the alarm signal is to be sent. <Output Duration>: Determines the period of time to output the alarm signal to the specifi ed alarm output port when a motion is detected. If another detection event is generated during the alarm output, the delay time is recalculated on the basis of the most recently generated motion detection. <Alarm Image Transfer>: If <On> is selected, a JPG image is transmitted through FTP or Email (SMTP) according to the <EVENT> ➝ <Transfer Setup> settings.
English – 63
