how to use osd menu
SYSTEM INITIALIZE
SYSTEM INITIALIZE |
|
CLEAR ALL DATA | NO |
CLR DISPLAY SET | NO |
CLR CAMERA SET | NO |
CLR MOTION SET | NO |
CLR FUNCTION SET NO
REBOOT | CAMERA | NO |
REBOOT | SYSTEM | NO |
BACK
EXIT
•CLEAR ALL DATA
Deletes all confi guration data such as display, camera, motion setup and so on.
•CLR DISPLAY SET
Initializes Display Confi guration
•CLR CAMERA SET
Initializes Camera Confi guration
•CLR MOTION SET
Initializes Motion Confi guration
•CLR FUNCTION SET
Deletes Preset Data, Auto Pan Data, Pattern Data, Scan Data and Schedule Data
•REBOOT CAMERA
Reboots Zoom Camera module
•REBOOT SYSTEM
Reboots Smart Dome Camera
❖Initial Configuration Table
• Display Confi guration
Camera ID | ON |
PTZ Information | AUTO |
Action Title | AUTO |
Preset Label | AUTO |
Alarm I/O | AUTO |
Date/Time | ON |
Privacy Zone | Undefi ned |
• Motion Confi guration
Preset Lock | OFF |
Power Up Action | ON |
ON | |
Jog Max Speed | 140°/sec |
Jog Direction | NORMAL |
Image Hold | OFF |
Park Action | OFF |
• Communication Setup
Protocol | AUTO |
Baud Rate | 9600 |
• Camera Confi guration
Focus Mode | ONEAF |
Digital Zoom | ON |
Image Flip | OFF |
Flickerless | OFF |
White Balance | AUTO |
Backlight/BLC | ALL OFF |
Day/Night | AUTO 1 |
AE Mode | AUTO |
Iris Level | F4 |
Gain Level | +2dB |
Shutter Speed | 1/60(MANUAL), AUTO X16(AUTO) |
Brightness | 13 |
• Function Data
Preset 1~128 | Undefi ned |
Auto Pan 1~8 | Undefi ned |
Pattern 1~4 | Undefi ned |
Scan 1~8 | Undefi ned |
Schedule 1~7 | Undefi ned |
36 – 36x Network Smart Dome Camera
