setting static ip
4. In the <PORT>fi elds, set up port numbers. | 4 |
•<HTTP Port>: A HTTP port used to connect to a camera using the Internet browser. The default value is 80. The HTTP
port value can be changed by using the up/down button to the right.
The HTTP port number starts with 80 and increases/decreases to 10000, 10006, 10012…
•<Device Port>: A port used to control video transmission. The
default value is 60001(TCP). | 5 | 6 |
•<TCP Port>: A port used to transfer video using TCP protocol. The default value is 60002(TCP).
•<UDP Port>: A port used to transfer video using UDP protocol. The default value is 60003(UDP).
•<Upload Port>: A port used to upgrade software. The default value is 60004(TCP).
•<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is 60005(UDP).
5.Enter your password.
•The default password is “4321”.
•The password is the camera login password of the root user.
6.Click the [OK] button.
•The manual network setting is fi nished.
7.The camera is set to the manually entered IP and is restarted.
❖If more than one camera are connected to an IP Router
Set the IP and port settings for camera differently.
| Items | 1st Camera | 2nd Camera | |
|
|
|
|
|
IP Related |
| IP Address | 192.168.1.200 | 192.168.1.201 |
| Subnet Mask | 255.255.255.0 | 255.255.255.0 | |
Items |
| |||
| Gateway | 192.168.1.1 | 192.168.1.1 | |
|
| |||
|
|
|
|
|
|
| HTTP Port | 80 | 10000 |
|
| Device Port | 60001 | 10001 |
Port Related Items |
| TCP Port | 60002 | 10002 |
| UDP Port | 60003 | 10003 | |
|
| |||
|
| Upload Port | 60004 | 10004 |
|
| Multicast Port | 60005 | 10005 |
|
|
|
|
|
M If <HTTP Port> is not set to 80,the user must specify the port number as well as the IP address in the Address input box of an Internet browser to connect to the camera.
ex) http://IP Address: HTTP Port e.g.) http://192.168.1.201: 10000
English – 45
