Samsung SNC-C7478P manual Setup Tool, Video & Audio Configuration

Setup Tool

This section is provided to familiarize the user with the setup tools. Intuitive options are not explained in detail.

All the changes on Setup Tools take effect immediately. These settings will be global, affecting the view of all users currently logged on.

All settings are always saved in the IP Smart Dome Camera even when you close the viewer program or you turn off the Power of the IP Smart Dome Camera. If you lost your password, you must press the reset button to return all setting to its factory defaults.

VIDEO & AUDIO

CONFIGURATION

❖Resolution

•Select a video size from D1, VGA and CIF.

NTSC : D1(720x480), VGA(640x480), CIF(352x240)

PAL : D1(720x576), VGA(640x480), CIF(352x288)

❖Quality

•Select a video quality level between 1 and 10.

❖Frame Rate

•Select a frame rate.

NTSC : 30fps, 15fps, 8fps, 3fps, 1fps

❖Audio Input Gain

•Select the audio amplification level between 0 and 10.

(* You will not be able to hear the audio data if the audio input gain is at zero.)

IP

❖IP Type

•Select the IP setting type from <Static IP>, <Dynamic IP> or <PPPoE IP>

❖MAC Address

•Shows the Ethernet MAC Address. Since this value is used to create a DDNS address, confirm the value.

❖IP Address

•Shows the currently configured IP address. If the <IP Type> is set to <Static IP>, you can change the IP address.

❖Subnet Mask

•Show the <Subnet Mask> address for the configured IP address.

❖Gateway

•Show the <Gateway> address for the configured IP address.

❖DNS Server

•Shows the IP address of the DNS(Domain Name Service) server.

❖HTTP Webserver Port

•Show the HTTP port used to connect to the

English – 41