5.4. P/T Setting
5.4.4. Area Masking
If you want to exclude some areas for surveillance, they can be turned into black. You can mask 4 parts of one screen.
Position : Use the Execution key to determine the position for screen operation from the left.
On/Off : Operation of screen area masking can be determined. Default setting is OFF.
If Area Masking is set while the Camera is in the Digital Flip posion, automatically the Camera moves
Note the initial position which is not set for the Digital Flip and then Area Masking position can be set. This is not a malfunction.
5.4.5. Prop. P/T
Pan and Tilt speeds can be changed depending on zoom magnification. Tele will slow down the speed of Pan/Tilt and Wide will increase the Pan/Tilt speed. It will take about 20 seconds for 1 cycle in Tele mode and about 3 seconds in the Wide mode. Default setting is ON.ed. Default setting is OFF.
89
