5.4. P/T Setting
5.4. P/T Setting
5.4.1. Pan Limit
The moving range in the Pan direction can be limited.
Position : Moving range can be set up. Set the position from the left using the Execution key. The stop position may change due to the initialization by such operation as power resumption depending on position setting. This does not mean it is out of order.
On/Off : When this function is on, the limit is effective. Default setting is Off.
5.4.2. Tilt Limit
Moving range in the tilt direction can be limited.
Position : Moving range can be set up. Set the position from the top direction using the Execution key. The stop position may change due to initialization by such operation as power
87
