5.6. Initialization Setting
5.6. Initialization Setting
Initialization Menu
①Power On Reset
Camera is initialized into the original status of power input.
➋Initial Position
If you want to set the default direction of the camera so that the camera faces that direction when the power is turned on, you can set up the desired Pan and Tilt for the camera.
③Factory Default Settings
Camera is initialized into the factory default settings.
Data including Preset is deleted. This function is used for initialization all settings.
④Camera Default Settings
If only the camera module is replaced due to camera module failure, the new camera module can be set up with the settings of the old camera module.
➎Auto Refresh
The electric circuit and the status of the equipment parts within the camera are optimized regularly. (The cycle can be set up.) If camera faces toward a certain source of light or if the settings cannot be kept because of the long time rotation filming of a certain area, the Auto Refresh function is used to maintain and reset the existing
95
