10X PTZ Network Camera SNP-1000A

If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from.

Problem

 

 

Solution

 

 

Nothing appears on the

ƒ

Please check the power connection.

screen.

ƒ Please

check

the

images

after

 

 

 

connecting the video signal line

 

 

ƒ Open

MS-DOS window to check

 

 

whether 10X PTZ Network Camera

 

 

SNP-1000A is connected to network.

 

 

In case of ping 192.168.1.100,

 

 

 

replace it with IP address set up.

 

 

 

The video image is not

ƒ

Please check if the lens is clean.

clear.

 

Please clean the lens with a clean

 

 

cloth or brush.

 

 

 

 

ƒ

Please adjust the contrast feature of

 

 

the monitor.

 

 

 

 

ƒ

Please make sure that the screen is

 

 

not exposed directly to a bright light.

 

 

Please move the camera if necessary.

 

 

 

The screen is dark.

ƒ

Please adjust the contrast feature of

 

 

the monitor.

 

 

 

 

ƒ If you have an intermediate device, set

 

 

the 75Ω/Hi-z properly, and check the

 

 

terminals.

 

 

 

 

 

 

There is a problem with

ƒ

Please check if an appropriate power

the camera operation.

 

source

to the

camera

complies

with

The camera surface is

 

the

manufacturer's

standard

too hot and black

 

 

requirement, or if the voltage keeps

stripes appear on the

 

screen.

 

changing.

 

 

 

98

Page 102
Image 102
Samsung SNP-1000A Problem Solution Nothing appears on, Video image is not, Clear, Screen is dark, Camera operation