Useful Information

 

 

 

 

 

Programmable settings

 

 

 

 

 

 

Problem

Cause/solution

I cannot register a handset

 

R The maximum number of handsets (6) is already

 

to a base unit.

registered to the base unit. Cancel unused

 

 

 

handset registrations from the base unit (page 39).

 

 

 

 

 

 

 

 

Battery recharge

 

 

 

 

Problem

Cause/solution

The handset beeps and/or

 

R Battery charge is low. Fully charge the batteries

 

 

flashes.

(page 11).

 

 

 

 

 

I fully charged the batteries,

R Clean the battery ends ( , ) and the charge

but

contacts with a dry cloth and charge again.

still flashes,

R It is time to replace the batteries (page 11).

is displayed, or

the operating time seems to be shorter.

Making/answering calls, intercom

Problem

is displayed.

Noise is heard, sound cuts in and out.

Cause/solution

R The handset is too far from the base unit. Move closer.

R The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.

R The handset is not registered to the base unit. Register it (page 38).

R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference.

R Move closer to the base unit.

R If you use a DSL/ADSL service, we recommend connecting a filter (contact your DSL/ADSL service provider) to the telephone line between the base unit and the telephone line socket. Contact your DSL/ADSL provider for details. (for Australia)

R If you use a DSL/ADSL (JetStream) service, we

recommend that you contact your DSL/ADSL service provider to have a DSL/ADSL Splitter installed. We do not recommend the use of generic DSL/ADSL filters.Contact your DSL/ADSL service provider for details. (for New Zealand)

63

Page 63
Image 63
Panasonic KX-TG7652AZ, KX-TG7653AZ Programmable settings Problem Cause/solution, Battery recharge Problem Cause/solution