Making/Answering Calls
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 28).
Example: If you need to dial the line access number “9” when making outside calls with a PBX:
19 a MPAUSEN
2Dial the phone number. a M
N
Note:
R A 3 second pause is inserted each time MPAUSEN is pressed. Repeat as needed to create longer pauses.
Answering calls
When a call is being received, the ringer indicator flashes rapidly.
1Lift the handset and press M
N or M
N when the unit rings.
R To answer a cellular call, you can also press MCELLN.
R You can also answer the call by pressing any dial key from 0 to 9, *, or #. (Any key answer feature)
2When you finish talking, press
MOFFN or place the handset on the base unit or charger.
Auto talk
You can answer calls simply by lifting the handset off the base unit or charger. You do not need to press M
N. To turn this feature on, see page 33.
Adjusting the handset ringer volume
n While the handset is ringing for an incoming call:
Press MDN or MCN repeatedly to select the desired volume.
n Programming the volume beforehand:
1To change the cellular line ringer volume:
For CELL 1:
MMENUN#6281 For CELL 2: MMENUN#6282
To change the landline ringer volume:
MMENUN#160
2MbN: Select the desired volume.
3 MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call, you can turn the ringer off temporarily by pressing M
N.
Adjusting the base unit ringer volume
n While the base unit is ringing for an incoming call:
Press MjN or MkN repeatedly to select the desired volume.
R To turn the ringer off, press and hold MkN until the unit beeps.
n Programming the volume beforehand:
1To change the cellular line ringer volume:
For CELL 1:
MMENUN#*6281 For CELL 2: MMENUN#*6282
To change the landline ringer volume: MMENUN#*160
22
