Panasonic KX-TG7652AZ, KX-TG7653AZ Dect repeater Problem, Deregister, Re-register, Mlocatorn

			Useful Information
DECT repeater
Problem	Cause/solution
The unit does not work.	R When the indicators do not light, the AC adaptor is
	not connected properly. Check the connections.
	R When the indicators do not light green, move the
	unit closer to the base unit.
	R The repeater mode is “Off”. Set the repeater
	mode to “On” (page 57).
	R Registration may have been cancelled. Deregister
	the unit, then re-register.
	Deregister:
	1 Unplug the AC adaptor, then press and hold
	MPROGRAMN.
	2 While pressing and holding MPROGRAMN,
	re-connect the AC adaptor.
	3 Keep holding to press MPROGRAMN for about
	10 seconds until the		indicator stops
	flashing and lights red. Then release
	MPROGRAMN.
	R The	and indicators light amber for a
	moment then only the indicator flashes
	red.	indicator flashes green after
	R If the
	releasing MPROGRAMN, deregistration
	failed. Deregisterthe unit again.
	Re-register:
	1 DECT repeater: Unplug the AC adaptor.
	2 Base unit: Press and hold MLOCATORN for
	about 5 second, until the registration tone
	sounds.
	R The next step must be completed within 90
	seconds.
	3 DECT repeater: Connect the AC adaptor,
	then wait until the		indicator and indicator
	light green.

4Base unit: To stop the registration tone, press

MLOCATORN.

While talking using the	R The handset is out of range. Move the handset
handset, sound cuts in and	closer to this unit.
out.

69