Link to Cell
To change the handset ringer tone for a cellular line, see page 31.
Auto connection to the cellular phone
After registration, your cellular phone is connected to the base unit. If you move the cellular phone out of base unit range, the cellular phone is disconnected from the base unit. This feature allows the base unit to try to reconnect the cellular phone at regular intervals when it returns within base unit range. You can set the interval. The default setting is “1 min”.
Important:
R When you are using a cellular line or a Bluetooth headset, the base unit loses its connection from other Bluetooth devices (cellular phone or headset). To automatically resume the connection to cellular phones, leave the auto connection on.
R Some cellular phones lose connection after usage, please check the specification of your cellular phone for more details.
1MMENUN#632
2MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
R Some cellular phone may ask you if you accept the connection requirement from the base unit. In that case, select “Off” in step 2. Check the specification of your cellular phone.
Connecting/disconnecting the cellular phone manually
When you make or answer calls with your cellular phone, we recommend disconnecting it from the base unit,
otherwise received audio may not be heard on your cellular phone.
You can also manually reconnect the cellular phone to the base unit without waiting for the auto connection feature to resume the connection.
1MMENUN
2To connect/disconnect: For CELL 1: #6251 For CELL 2: #6252 R A long beep sounds.
3MOFFN
Cellular line only mode (If you do not use the landline)
If you do not use the landline, we recommend setting the unit to the cellular line only mode.
1MMENUN#157
2To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Note:
R Once you set this mode, you can use M
N or M
N instead of MCELLN (page 21).
R Once you set this mode, the following features cannot be used:
–Landline features (page 34)
–Answering system (page 47)
–Voice mail features (page 53)
R After this mode is turned on or off, the base unit reboots.
–Bluetooth connections from cellular phones or headset are disconnected. If the auto connection is turned on (page 18), the cellular phones are reconnected.
–
will be displayed on the handset momentarily. The handset can be used once 
is displayed.
18
