Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
RSet the date and time beforehand
(page 15).
1MMENUN#720
2MbN: Select the desired alarm option.
a MSELECTN
Off Turns alarm off. Go to
step 7.
Once An alarm sounds once at
the set time.
Daily An alarm sounds daily at
the set time. Go to step 4.
3Enter the desired month and date.
a MOKN
4Set the desired time.
5MAM/PMN: Select “AM” or “PM”. a
MOKN
6MbN: Select the desired alarm tone.
a MSELECTN
RWe recommend selecting a
different ringer tone from the one
used for outside calls.
7MSELECTN a MOFFN
RWhen the alarm is set, is
displayed.
Note:
RTo stop the alarm, press MOFFN or
place the handset on the base unit or
charger.
RWhen the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Night mode
Night mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for
each handset.
Important:
RSet the date and time beforehand
(page 15).
RWe recommend turning the base unit
ringer off (page 31, 33) in addition to
turning the night mode on.
RIf you have set the alarm, the alarm
sounds even if the night mode is
turned on.
Turning night mode on/off
1MMENUN#238
2MbN: Select the desired setting. a
MSAVEN
RIf you select “Off”, press MOFFN
to exit.
3Enter the desired hour and minute
you wish to start this feature.
4MAM/PMN: Select “AM” or “PM”. a
MOKN
5Enter the desired hour and minute
you wish to end this feature.
6MAM/PMN: Select “AM” or “PM”.
7MSAVEN a MOFFN
RWhen the night mode is set, is
displayed.
Changing the start and end time
1MMENUN#237
2Continue from step 3, “Turning night
mode on/off”, page 36.
36
Programming
TG76xxAZ(en)_0207_ver012.pdf 36 2012/02/07 15:34:47