Useful Information
Error messages
Display message
Access # to VM service is not stored
Base no power
or
No link.
Busy
Check tel line
Error!!
Failed
Cause/solution
R You have not stored the voice mail access number. Store the number (page 53).
R The handset has lost communication with the base unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
R No cellular phone is registered to the base unit. Register a cellular phone (page 16).
R The called unit is in use.
R Other units are in use and the system is busy. Try again later.
R The handset you are using is too far from the base unit. Move closer and try again.
R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 10).
R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode (page 18).
R Recording was too short. Try again.
R Someone is using a cellular line or headset. Try again later.
R The phonebook copy is incomplete (page 44). The cellular phone is disconnected from the base unit. Make sure that other Bluetooth devices are not connected to the cellular phone and try again.
R Although the unit tried to connect to the cellular phone or headset, the connection has failed.
–Someone is using a cellular line or headset. Try again later.
–Make sure that the cellular phone or headset is not connected to other Bluetooth devices.
60
