Link to Cell
Link to cell feature
To use this feature, you must first register and connect your cellular phones to the base unit (page 16). Your cellular phones must have Bluetooth wireless technology that is compatible with this product.
This feature allows you to:
–make or answer cellular calls using your home phone (handset) with better reception.
–maximise the benefits of cellular services (such as free night and weekend calls, or cellular to cellular call plans) by utilising unused peak minutes with your home phone.
–conserve the battery power of your cellular phone while the unit is on a cellular call. (We recommend charging your cellular phone during the cellular call as your cellular phone battery is being consumed.)
Important:
R Up to 2 cellular phones can be registered. However, only one Bluetooth device (cellular phone or headset) can be connected to the base unit at a time.
R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m away from the base unit.
Trademarks
R The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under licence. All other trademarks identified herein are the property of their respective owners.
Registering a cellular phone
Important:
R Before registering a Bluetooth enabled cellular phone to the base unit:
–we recommend you change the PIN (page 19).
–make sure that no Bluetooth device such as a Bluetooth headset is connected to your cellular phone.
1 Handset:
MMENUN
For CELL 1: #6241
For CELL 2: #6242
R After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of the procedure must be completed within 5 minutes.
2Your cellular phone: While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellular phone to enter the registration mode.
R Depending on your cellular phone, it may ask you to enter the base unit PIN (default: “0000”).
3Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds to complete registration.
R When the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to the base unit. You are ready to make cellular calls.
4To select which unit receives calls for the cellular line, press MOKN then continue from step 3, “Selecting which unit receives cellular calls”, page 17.
R If not required, go to step 5.
16
