Viewing the Control Panel (Panel Key)
✎✎ The product colour and shape may vary depending on the model.
✎✎ The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.
Camera | Remote control sensor |
m R
P
TV Controller
Function menu
The image is drawn by facing the front side of the TV.
✎✎ Follow these instructions facing the front of your TV
✎✎ When you use a TV camera, you should check whether a tape attached or not in rear of the TV camera, and then you can use a TV camera after adjust a camera angle. When you don't use a TV camera, we recommend to use after a camera lens fixes to upwards. In this case, Face recognition and Motion control functions is not available.
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Selecting the MENU (m)
Selecting the SMART HUB (™)
Selecting the Source (s)
Power off (P)
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusts the volume by moving the controller from side to side when the power is on.
Select a channel by moving the Controller downwards and upwards when the power is on.
To view and use the Function menu, press and release the Controller when the power is on. To close the Function menu, press and release the Controller again.
With the Function menu visible, select the MENU (m) by moving the Controller to the left. The OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the Controller to the right or left, or downwards and upwards to make additional selections. To change a parameter, select it, and then press the Controller.
With the Function menu visible, select SMART HUB (™) by moving the Controller upwards. The SMART HUB main screen appears. Select an application by moving the Controller, and then pressing the Controller.
With the Function menu visible, open the Source (s) list by pushing the Controller to the right. The Source list screen appears. To select a source, move the Controller down and up. When the source you want is highlighted, press the Controller.
With the Function menu visible, select Power off (P) by pulling the Controller downwards, and then press the Controller.
✎✎ To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.
✎✎ When selecting the function by moving the controller to the upwards/downwards/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the upwards/ downwards/left/right directions.
English - 4
