3. Holde the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm

(*).

C

4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.

5. Turn part (C) in the arrow direction to tighten it.

C

6. While holding down part (E), connect the water hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.

E

7. If you are using a screw type of water tap, use the provided screw-type adaptor to connect to the water tap as shown.

Installation

English  23

WD90N740NOA_DC68-03902D_EN.indd 23

 

 

2018/2/21 10:04:39