Before you start

Before you start

Initial settings

Run Calibration (recommended)

Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration.

1.Power off, and then power on the washing machine.

2.Hold down Temp. and Delay End+ simultaneously for 3 seconds to enter Calibration mode. The “Cb” message appears.

3.Press and hold Start/Pause (Hold to Start) to run the Calibration cycle. The drum will rotate clockwise and counter-clockwise for about 3 minutes.

4.When the cycle is complete, “0” appears on the display and the washing machine will turn off automatically. The washing machine is now ready for use.

Laundry guidelines

STEP 1  Sort

Sort the laundry according to these criteria:

•Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon.

•Colour: Separate whites from colours.

•Size: Mixing different-sized items together in the drum improves the washing performance.

•Sensitivity: Wash delicate items separately for pure, new woollen items, curtains, and silk items. Check the labels on the items.

NOTE

Make sure to check the care label on the clothing, and sort them accordingly before starting the wash.

28  English

WD90N740NOA_DC68-03902D_EN.indd 28

 

 

2018/2/21 10:04:41