Operations
Operations
Control panel02
|
|
| 11 |
08 |
| 10 | 09 |
|
|
| 12 |
07 |
|
|
|
03 | 04 | 05 | 06 |
01 | Cycle Selector | Turn the dial to select a cycle. | |
|
|
| |
|
| The display shows current cycle information and estimated time | |
02 | Display | remaining, or an information code when a problem occurs. | |
|
| For buttons and icons, refer to the corresponding page.. | |
|
|
| |
03 | Temp. | Press to change the water temperature for the current cycle. | |
| |||
|
|
| |
04 | Rinse | Press to change the rinse count for the current cycle. You can set the | |
rinse count to a max of 5, depending on the cycle. | |||
|
| ||
|
|
| |
|
| Press to change the spinning speed for the current cycle. The | |
|
| revolutions per minute (RPM) differs with the model. |
•Rinse Hold( 
): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.
-To use the Rinse Hold option, press Spin repeatedly until all rpm numeric indicators turn off. Not available for the DRAIN/
|
| SPIN cycle. | |
05 | Spin | • No Spin( ): The drum does not rotate after the final drain | |
process. | |||
|
|
-To use the No Spin option, press Spin repeatedly until all rpm numeric indicators turn off. Only available for the DRAIN/ SPIN cycle.
•Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. When the cycle time and spinning speed appear, press Spin repeatedly until a desired spinning speed is selected. Then, press and hold Start/Pause (Hold to Start) to start the cycle. The spinning time depends on the selected cycle.
34 English
|
| 2018/2/21 10:04:47 | |
|
| ||
|
|
|
|