PUTTING DETERGENT IN THE WASHING MACHINE
1.Pull out the detergent drawer.
2.Add laundry detergent into compartment (
).
3. | Add softener into compartment ( ) (if you desire). |
4. | Add prewash detergent into compartment ( ) (if you |
| desire). |
Concentrated or thick fabric softener and conditioner must
CAUTION be diluted with a little water before being poured into the dispenser (prevents the overflow from becoming blocked.
WASHING CLOTHES USING FUZZY LOGIC
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Logic” automatic control system. When you select a wash programme, the machine will set the correct temperature, washing time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1.Turn on your sink’s water faucet.
2.Open the door.
3.Load the articles one at a time loosely into the drum, without overfilling.
4.Close the door.
5.Add the detergent, softener, and prewash detergent (if necessary) into the appropriate compartment.
To use prewash detergent, select ‘pre’ option by pressing ‘Wash’ button.
6.Turn the Fuzzy Control dial to select the
appropriate program for the type of clothes Cotton,Synthetic,Shirts,Delicate,Hand Wash For Wool,Silk,Quick,Rinse+Spin,Spin,Drain, Mixed Load,Baby Cotton,Enzyme,Daily Wash.
You will see the indicators light up on the control panel.
7.At this time, you can control the washing type, wash temperature, Rinse times, spin speed, delay time by pressing the appropriate option button.
8.Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1.Open the door.
The door will not open until 3 minutes after the machine stops or the power turns off. If the 
) turns on and off, please wait until the lamp turns off.
2.Remove laundry.
02WASHING A LOAD OF LAUNDRY
washing a load of laundry _13
