Sangean Electronics RCR-7WF, RCR-8WF manual Volume control, Audio setting tone control

Models: RCR-7WF RCR-8WF

1 201
Download 201 pages 63.68 Kb
Page 19
Image 19
Volume control

Volume control

While the radio station is playing, you can change the volume by pressing Volume+/- buttons on the top panel.

Audio setting (tone control)

Your radio has bass and treble characteristics of the sound can be adjusted to your personal taste.

1.Long press (press and hold) the Select button (the blue button) until the display shows “ < off > ”.

2.If adjusting selecting bass (or treble), press Tuning +/- buttons until ‘’Bass” (or “Treble”) is shown. Then press the Select/Tone button and the display will show the current Bass (or treble) level.

3.Press the Tuning+ or Tuning – button to adjust the desired level (between -7 and +7 for base; +5 ~ -5 for treble) and press the Select button to confirm selection.

4.Under this catalog, except for base and treble, there is <Flat>. When Flat is selected, treble and base will be set to zero, and the display will show “Equalization level rest”.

Internet radio station preset

Storing an Internet radio station in a preset

There are 5 memory presets available.

1.Select the required station as previously described.

2.When the radio is playing, press and hold 1 of the 5 preset buttons that you wish you store. The station will be stored under this chosen preset.

3.Repeat this procedure for any other preset memories that you wish to configure.

Recalling an preset Internet radio station

When the radio is playing, press 1 of the 5 preset buttons that you wish to recall. The radio will connect to the station stored in preset memory.

Note:

If you have not previously stored a radio station in the selected preset, your current radio station will continue to play.

GB

18

Page 19
Image 19
Sangean Electronics RCR-7WF, RCR-8WF manual Volume control, Audio setting tone control, Internet radio station preset