English -23-

ConnectPeripheralEquipment

HighDefinition

YourLCDTelevisionis capableof displayingHigh Defi-
nitionpictures from devices suchas aHigh Definition
SatelliteReceiveror DVD Player.These devices must
be connectedvia the HDMI sockets or Component
Socket. These sockets can accept either 720p or
1080isignals. Also, only HDMImodes accept 1080p
signals.

Via The Scart

TheTV has 2 Scart sockets. If you want to connect
peripherals (e.g. video, decoder, etc.) which have
Scartsockets to the TV, you can use SCARTsocket
of theTV.
NOTE: If an external device is connected via the
Scartsockets, the TV will automaticallyswitch
to AVmode. If both sockets are employed at
the simetime, SCART 1 becomes the prefer-
ential.

Via AerialInput

If the device youwant to connect does not have a
Scartsocket, you should connect it to theAerial input
of theTV.
If the VCR is connected via Aerial input, it is
suggestedto use Programme 0.

Decoder

If you are s ubscribed t o cable TV off ers, the
organisationwill supplyyou a corresponding decoder
unitto allow the programmes to be unscrambled.
For furtherinformation consult your dealer.

Connecta decoder with an aerialsocket to

theTV

•Connect the aerial cable.

Connecta decoder without an aerialsocket

tothe TV

• Connectthe decoder to the EXTERNAL socket of
TV with a RCA cable. Through the SCART/RCA
socketof the decoder, you may attaina betterdis-
playresolution.

TV AndVideo Recorder

•Connect the aerial cables.
Betterpicture quality can beobtained if you also con-
necta Scart cable to SCART sockets.

PlaybackNTSC

•Connect NTSC VCR playerto a Scartsocket of the
TV.
Then,presst he“
AV
”buttonto select EXT1 or EXT2.

CopyFacility

Source selectionfor VCR recording.
• SelectFeature menu.
•Select SCART 2 Out by pressing
/
button.
•For copying the picture that comes from the tuner,
selectSCART 1.

CameraAnd Camcorder

ToConnectToAVInput

Connectyour camera or camcorderto AV input of the
TV.
•Connect your equipmentto theTV viaVIDEO (yel-
low), AUDIOR (red) and AUDIO L (white) inputs.
Youmust connect the jacks into the input with the
samecolour.

ToConnectToS-VHSInput

Connectyour camera or camcorder S-VHS input of
theTV.
•Connect your equipment to the TV via S-VHSinput
and audio inputs of AV inputs by using S-V HS
cables.

ConnectThe Decoder To The Video

Recorder

Some video recordershave a special Scart socket
for decoder.
• Connecta Scart cable to the Scart socket of your
decoder and to the special Scart socket of your
video recorder.Refer to the booklet of your video
recorder.

ConnectingHeadphones(optional)

Usethe stereo headphone socket of the TV,to con-
nect headphones.
NOTE: If you want to connect more equipment to
your TV,consult your dealer.

AudioLineout

To connect the external speakers to your TV,use
LineOuts of the TV.
NOTE:While watching HDMI source, Lineouts elec-
tion could onlybe the current source.

ConnectingSubwoofer

Use Subw oofer Out soc ket to connec t an
external,active subwoofer to the set to givea much
deeper bass effect.
01-ENG-42781W-MB26-UKIDTV-BSI-1050UK-(WSUB-ALO-ECOPIP)-SANYO-C2-10050046-50110543.p6510.07.2007,12:5423