Record Status, Setting Record Time | Sanyo DRW-500 guide

Record Status

The program timer switches the unit on and off to record a TV program at a preset time.

You can program a total of 15 times slots to be recorded, during the next one-year period.

These settings are retained in the program memory and will repeat as long as a recordable disc is loaded in the unit.

Note:

The clock must be set before this setting. See “SETTING THE CLOCK” on page E18.

Preparations

(Record Status ---> Record Time, Record Day, Input Source, TV, Record Mode & Title)

1. Select “Record Program” in “Menu” screen. See page E22.

Menu

Play/Edit Disc

	4
Record Program	a Record Status
	5
Setup Menu	Record List

Press SETUP to exit

2.Press [ENTER] (or [a]). “Recording Status” is highlighted.

	Menu
Play/Edit Disc
Record Program	b Record Status
	5
Setup Menu	Record List

3.Press [ENTER] (or [a]) again. “Record Show” screen appears. Example:

		Record Show
Verify the settings. Press ENTER to edit.
	Start	End
Record Time	08:31	09:31
Record Day		2004/05/01
Input Source	Tuner
TV	10
Record Mode	SP
Title	20040501
Press SETUP to exit		Done	Cancel

4.Press [o] or [p] to select the item.

Record Time ===> See the right column. Record Day ===> See page E34.

Input Source	===>	See page E35.
TV	===>	See page E35.
Record Mode	===>	See page E36.
Title	===>	See page E36.

Note:

After all settings are completed, press [p] to select “Done”, and then press [ENTER].

Setting “Record Time”

Note:

If you have set “Record Status” already, open “Record List” to check the list. Remove the unnecessary program from the list first. See page E37.

1.Select “Record Time”. Example:

		Record Show
Verify the settings. Press ENTER to edit.
	Start	End
Record Time	08:31	09:31
Record Day		2004/05/01
Input Source	Tuner
TV	10
Record Mode	SP
Title	20040501
Press SETUP to exit		Done	Cancel

2.Press [ENTER].

The start and end time screen appears. Example:

Record Show

Press 45 or use the number keys on remote to change settings. Use the International Time for the hour(00-23).

Hour	Minute	Hour	Minute
4
Start 08	: 31	End 09	: 31	Done
5				Back
				Back

Press SETUP to exit

3.Press [o] or [p] (or the number buttons on the remote control) to set the start and end times.

Note:

Press [a] or [b] to move the cursor.

4.Press [a] to select “Done”.

5.Press [ENTER].

The record time is set. The screen returns. Example:

		Record Show
Verify the settings. Press ENTER to edit.
	Start	End
Record Time	21:30	22:00
Record Day		2004/05/01
Input Source	Tuner
TV	10
Record Mode	SP
Title	20040501
Press SETUP to exit		Done	Cancel

Note:

To cancel the setting, select “Back” or “Cancel” in the screen, and then press [ENTER].

-E33-

Image 34

Sanyo DRW-500 instruction manual Record Status, Setting Record Time

Contents

SANYO’S HELP-LINE Please Read This Manual Contents Important Safety Instructions Example of Antenna Grounding AS PER Safety Certification Accessories FL Display ControlsFront Panel Back Panel Inserting batteries Remote ControlRemote control range Important Note To reduce the volume temporarily muting For Safe and Efficient Operation Before Connection Connecting the Antenna CableBasic Connection If you use See Channel Switch Setting Example Basic Antenna/Cable Connections Example Connecting a Cable Box Partial back panel Example Connecting to the S-VIDEO OUT jack Connecting the Video CableExample Connecting to the Video OUT jack Example Connecting to the Component Video OUT jacks For Video connection, see page E11 Connecting the Audio CablesExample Connecting to your TV or Audio System Yellow plug is used for video connection. See page E11 To enjoy Dolby Digital or DTS sound DVD recorder To Audio OUT jacks Partial back panel Connecting the Power Cord Video cable WhiteL To AV1 in jacks Example Connection for recording from other equipmentSee AV Select on page E32 Not supplied Example Connection for recording to other equipment Connecting to a Satellite Receiver or a Cable Box Preparations Setting the ClockImportant Note To Set the Clock Setting Channel Setup Tuner SettingTuner Select Channel List Auto CH ScanChannel List Modify Channel MTS Multi-channel TV Sound Select Setup Power Before Initial SettingCommon Procedure Important Note Setting Record Mode Initial SettingsRecording Setup Recording Setup --- Record Mode & Auto Chapter Setting Auto Chapter Setting Disc Menu DVD Control Setting Audio Setting Angle MarkSetting Subtitle Choosing Rating Setting Parental ControlIf you forget the password… Parental Control Set Set Password +10 General Setting Menu LanguageGeneral Setup General --- Menu Language Video Setting TV DisplayVideo Setup Video --- TV Display Audio Setup Setting Digital OutSetting DRC Dynamic Range Control Audio Preparations AV Select --- AV1 Select & AV2 Select Setting AV1 Select and AV2 SelectAV Select AV Select Setting Record Time Record Status Important Information Setting Record DayNumber Buttons Important Note Setting Input Source Setting TV Setting Title E36 Record List Playable Discs Disc InformationRecordable Discs Disc type and logo mark DVD-Video Disc Handling, Storing and Cleaning DiscsRegion Number DVD-Video disc only Audio CD Disc Recording OPEN/CLOSE PowerREC Mode See Recordable Discs on page E38 Pause Stop Number Buttons REC Mode Record m To pause recordingRecording TV Programs Display Channel + Recording stereo program and SAP Second Audio Program To watch another TV while recordingTV/DVD Audio See MTS Multi-channel TV Sound Select on page E21 Recording from an External Equipment VCR, etc Timer RecordingPower Input Setup Pause Stop Record m Disc Playback Basic Playback Stopping Playback Chapter Track Skip Selecting a Top MenuSelecting a DVD Menu Title or Chapter Search Fast Playback Time Search CDTrack Search CD Slow Motion Playback DVD-Video DVD+RW DVD+R Repeat Playback Picture ZoomViewing from a Desired Camera Angle Multi-Angle DVD-Video Designated Range Repeat Playback A-B Repeat Subtitle Audio Selecting Subtitle LanguageSelecting Audio Soundtrack Language Multi-Language Changing the audio channel output To Check the Disc Playing Time Shuffle Playback CDProgrammed Playback CD Shuffle Prog Before Starting MP3 CD OperationMP3 CD Playback To Check the Elapsed Playing Time PauseFile Skip Pause Stop Play Picture Disc Operation Kodak Picture CD Playback If the disc is mixed with MP3 and Jpeg files… Jpeg CD PlaybackA, b Enter Play Pause Stop Play Title DVD+RW DVD+R EditingCheck carefully before proceeding Play/Edit Titles Press a or b to select the title first Title Delete DVD+RW Edit Title Rename DVD+RW DVD+R Format Disc DVD+RW Check carefully before proceedingEdit Disc Erase Disc DVD+RW Rename Disc DVD+RW DVD+R Protect Disc DVD+RW Operation Troubleshooting GuidePower Picture Sound Recording/Timer RecordingPlayback Specifications MaintenanceCleaning the cabinet Exclusions Weekdays 730 AM 400 PM Central TimeObligations Model No Serial No Date of Purchase