TUNER SETTING
This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the memory. In addition to normal VHF and UHF channels, this unit can receive up to 125 Cable TV channels. To use this unit with an antenna, set the “Channel Setup” menu.
Important Note: |
|
• The antenna must be connected to this unit. See pages E8 | 4, 5, a, b |
~ E10. | |
• You may need extra instructions during this setting. If a |
|
message appears, please follow the instructions displayed |
|
on the TV screen. |
|
• For improvement, |
|
without notice. |
|
|
|
ENTER
Setting “Channel Setup”
1.Open “Recording Setup” screen.
(Repeat steps 1 ~ 5 of “To Set the Clock” on page E18.)
| Recording Setup |
Record Mode | a HQ |
| 5 |
Auto Chapter | SP |
Set Clock | LP |
Channel Setup | EP |
| EP+ |
|
|
Press SETUP to exit | Current selection |
2.Press [p] to select “Channel Setup”.
3.Press [ENTER] (or [a]) to select the sub menu.
| Recording Setup |
Record Mode |
|
Auto Chapter | b Auto CH Scan |
| 5 |
Set Clock | Channel List |
Channel Setup | Modify Channel |
| Tuner Select |
| MTS Select |
|
|
Press SETUP to exit |
|
4.Press [p] or [o] to select the item.
Auto CH Scan ===> See page E20.
Channel List ===> See page E20.
Modify Channel | ===> | See page E21. |
Tuner Select | ===> | See the right column. |
MTS Select | ===> | See page E21. |
If you use this unit for first time, select “Tuner Select”.
Tuner Select
Select the antenna system “CATV” or “TV”.
1) Select “Tuner Select”.
| Recording Setup |
Record Mode |
|
Auto Chapter | Auto CH Scan |
Set Clock | Channel List |
Channel Setup | Modify Channel |
| 4 |
| b Tuner Select |
| 5 |
| MTS Select |
|
|
Press SETUP to exit |
|
2)Press [ENTER] (or [a]).
“Tuner Select Setup” screen appears.
Tuner Select Setup
Tuner Select | a | CATV |
|
| TV |
Press SETUP to exit | Current selection |
3)Press [a] to select the sub menu.
4)Press [p] or [o] to select “CATV” or “TV”.
5)Press [ENTER]. “√” appears.
6)Press [b] repeatedly to return to “Recording Setup” screen.
Need help? Call
