MP3 CD OPERATION

Before Starting

This unit can play back the CD that has recorded music data, MP3 files.

The file system is ISO9660 Level 1 and Level 2.

It would take 30 seconds or more for this unit to read MP3 files depending on its structure.

This unit can recognize up to 999 files or folders per disc. The CD with 1000 files or folders and over is not available to this unit.

MP3 CDs may not be played in the recorded order.

1.Please use the MP3 software with the function that can record data alphabetically or numerically.

2.Please refrain from making many sub-folders by preference.

However, some CD-R/RWs cannot be played back depending on the recording conditions.

Before playing back MP3 files, please read the following.

MP3 CD

MP3 files must have the extension letters, “.MP3” or “.mp3”.

Standard, sampling frequency, and the bit rate: MPEG-1 Layer 3

44.1kHz, 48kHz

56kbps ~ 320kbps (constant bit rate)

The recommended recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate.

LIMITATIONS ON DISPLAY

Available letters for display are the following: numbers of 0 through 9, and capital alphabets of A through Z.

CAUTION:

Some MP3 CDs cannot be played back depending on the recording conditions.

The CD has no music data or non-MP3 files cannot be played back.

The WMA files cannot be played back.

Customers should also note that permission is required in order to download MP3 fils and music from the Internet. SANYO has no right to grant such permission. Permission should always be sought from the copyright owner.

Important Note:

If “ ” appears on the TV screen during operation, the operation is prohibited by the unit or the disc.

MP3 CD Playback

1.Load the disc with the label facing up on the disc tray. (Please refer to “Basic Playback” on page E45.)

• “SmartNAVI” screen appears.

SmartNAVI

0 ROOT

1 DIR_S001

2 DIR_S002

3 DIR_S003

4MUSIC001

5MUSIC002

6MUSIC003

Enter

2.Press [p] or [o] to select the folder or file, and press [ENTER].

If the folder is selected, the file menu of the selected folder appears.

If the file is selected, the selected file playback starts (“Play” appears briefly on the TV screen).

Number buttons can be used for selecting the file. Examples:

To select No.3, Press [3].

To select No.10, press [+10], then [0].

To select No.24, press [+10], [+10], then [4].

3.Repeat step 2 to select the file in the folder, if necessary.

Note:

If the disc is loaded with the label side downward, or if a badly scratched disc is loaded, “NO DISC” or “NO PLAY” appears on the TV screen. If this occurs, load the disc correctly or replace the disc.

Stopping Playback

Press [n] during playback.

“Stop” appears briefly on the TV screen.

Need help? Call 1-800-813-3435

-E51-

Page 52
Image 52
Sanyo DRW-500 instruction manual MP3 CD Operation, Before Starting, MP3 CD Playback