Sanyo E11A202U ① Check that MAIN MCCB on the back panel is set to “OFF”, ②Press and hold it until the buzzer sounds. Release it when the buzzer sounds

9.2 UPS Startup (Battery Power)

During a power outage, low voltage, or other trouble with the AC input power to the UPS, you can supply power to the inverter output from the built-in batteries.

① Check that MAIN MCCB on the back panel is set to “OFF”.

① Breaker is “OFF”.

LEDs are all off.

②Press and hold it until the buzzer sounds. Release it when the buzzer sounds.

	Buzzer
	Musical trill
	LEDs	Blinking
	Green INPUT
	Green INV.ON/STAND BY	Off
Hold for about 6 seconds	Green OUTPUT	Off
	↓ after 1 to 2 seconds
	Green INPUT	Blinking
	Green INV.ON/STAND BY	Lit
	Green OUTPUT	Lit

③ Set the MAIN SW on the back panel to “ON”.

※Return to the Normal Operation and batteries are charged.
Buzzer
Silent
LEDs
Green INPUT	Lit
Green INV.ON/STAND BY	Lit
Green OUTPUT	Lit

− 20 −