Sanyo MPR-1411R instruction manual Setting Of Delay Of Door Alarm

SETTING OF DELAY OF DOOR ALARM

The door check indicator is light when the door is opened, and the alarm buzzer sounds with some delay to notice the door opening.

The delay time (between lighting of the door check indicator and activation of the alarm buzzer) can be changed. Set an appropriate delay time according to the condition of use to prevent the rise of chamber temperature resulting from inadequate door close.

(The available set range of delay time is between 1 and 15 minutes. Initial setting (factory setting) is 2 minutes.)

Table 4 Procedure for setting of delay of door alarm (Change the delay time to 3 min. from 2 min.)

	Description of operation	Key operated	Indication after operation
1		-----	The current chamber temperature is
			displayed.
2	Press numerical value shift key for		F00 is displayed and the first digit
	5 seconds.		blinks.
3	Press up arrow key 4 times.		The display is changed to F04 from
			F00.
4	Press set key.	SET	The current setting (002) is displayed
			and the first digit blinks.
5	Press numerical value shift key and		The display is changed to 003 from
	scroll the figure to 003.		002.
			Delay time is memorized and the
6	Press set key.	SET	current chamber temperature is
			displayed.

Note:

•The set mode returns to the temperature display mode automatically when 90 seconds has passed without any key operation. In this case, any setting before pressing set key (SET) is not memorized.

- 56 -

18